A Guide For The Beginners To Mount The Optics Firearms

 Adding optics firearms to your weapon collection is a good investment. They make shooting easier and accurate. Because why try aligning the rear and front sights with the target when the scope can do it for you by bringing all the three on the same plane of sight?
When you use the best optics firearms, it will definitely up your shooting game but only if you mount it correctly. The process can be intimidating and hence, a guide to proper mounting of the optics firearms is very necessary. Once you get the hang of it, you’ll be able to use all kinds of telescopic sights with your firearms – even the night vision devices like the ATN Scopes.


Moreover, since the optics firearms are going to be the forever friends of your weapons, they need to mounted accurately so as to bear all the bumps and knocks that your weapons go through and still deliver best-in-class performance. If you win at it once, you’ll face almost zero problems down the road throughout your shooting life.

This guide will give you a basic idea as to how to mount the optics firearms to your rifles (or even shotguns). Be it the spotting scopes, rifle scopes or ATN cameras, you’ll be able to use them with your weapons in no time if you get it right the first time.

To purchase the best Spotting Scope Australia, rifle scopes Australia or ATN cameras Australia, Safari Firearms, the firearm shop in Sydney is the one-stop solution.
The first step in mounting the optics firearms is getting the right components for the purpose. You need to select the appropriate mounting solution keeping in mind the kind of firearm you’re using. Similarly, the mounts and rings must be compatible with the optic you’ve chosen to use.

You will need various tools to mount the optic on your firearm and hence, need to select the right tool for the purpose. Purchasing a good mounting kit sounds like a wise decision. While mounting, it is necessary to keep your firearm stationary, so a gun cradle is a must. If you do not own one, a bench vise will also serve the purpose.

Next, you will have to clean/degrease all the components by using mineral spirits or acetones. There shouldn’t be a single trace of oil or grease on the components before you start mounting your optics firearms. While degreasing, follow all the safety protocols to keep yourself and your firearms protected.

Once you’re done with the cleaning, you can start mounting by placing the components in the correct slots.

But the work doesn’t end there. You need to adjust and tighten all the screws using the wrench provided to keep them firm. Continue doing so until the torque wrench indicates that all the screws are at their destined positions.

To allow the optics firearms to work properly, this step is very significant as all the components need to be in place to give you the correct image of the target. Also, to see clear and vivid images, it is essential for you to invest in the best optics and Safari Firearms, the firearm shop Australia is the right solution for it. Best deals on spotting scope Australia, Rifle Scopes Australia, gun cameras hunting, ATN scope Australia are found at this store in Sydney.

After screws, come the mounting rings which need to be fit to the bases using the hardware included for the purpose. Fit them in a way that they won’t interfere in the operation of the firearm. Sometimes, assembling all the components together might be difficult as they’re all mass-produced in different factories. In such cases, use the lapping tool to achieve perfect alignment.

Use the lapping compound on the inside of the ring bottoms to remove the finish from it. Continue the process of lapping until the compound stops removing the finish. If the rings are made of aluminium, removing the finish won’t cause any problems but in case of steel rings, you need to apply cold blue to prevent corrosion.

Now, it’s time to set the eye relief so that every time you look through the optic, you see a clear crisp image of your target. To do so, set the scope to its highest power and mount the firearm on your shoulder and look through it. You will see a black ring. Without moving the scope from that position, move the rearward of the optic in the rings toward your eye until the black ring disappears.

The optic firearms’ crosshairs must also be in place and the reticle of the scope must be in level with the firearm. This forms the next step. You can use your mounting solution to fix this issue and get your optics firearms working.

Attach the two ring sections as required, either horizontally or vertically depending upon the mounting solution you’re using. Take a look at your levels to check whether the bubbles from the mounting solution are in place or not.

Once done, you’ve finished mounting your optic firearms on your weapon. Now, inspect it, look through the telescopic sights to be sure if all is okay. Once everything looks perfect, your firearm is ready to fire!

Do not forget about the importance of purchasing good quality firearms and optics. For the best spotting scope Australia, rifle scopes Australia, ATN scope Australia or the ATN cameras Australia and gun cameras hunting, your go-to store is at Sydney, Safari Firearms, the best firearm shop Australia.



Comments

Popular posts from this blog

Best Thermal Rifle Scope For Australian Hunting Ground

Safari Firearms Australia - Night Vision Rifle Scopes and Thermal Rifle Scopes

Firearms in Australia